First Time Setup - TactSuit X16

For safety and battery protection, all TactSuits are shipped in sleep mode. Before using your TactSuit X16 for the first time, follow the steps below to properly activate the device.

Step 1: Charge the Device

To wake the TactSuit X16 from sleep mode, connect the included USB Type-C charging cable to the device and plug it into a power source.

Allow the device to charge for a while to ensure it has sufficient battery before turning it on for the first time.

The TactSuit X16 does not include a power adapter. You may use any AC adapter that meets your region’s safety standards (for example, UL-certified in the U.S. or CE-certified in Europe). You can also charge the device using a USB port on a PC or laptop.

⚠️ Using an unauthorized adapter or cable may cause damage to the device, affect performance, or void your warranty.

Step 2: Turn On the TactSuit X16

After charging:

1. Press and hold the power button on the Back Controller for approximately 2 seconds.

2. The TactSuit X16 will vibrate briefly.

3. The LED indicator will blink blue, indicating that the device is in Bluetooth pairing mode.
   

You are now ready to connect your TactSuit X16 to your device.