Pair or Unpair TactGlove DK2 with Mobile

You can easily check device information at any time by connecting your device to the bHaptics mobile app.

Pairing to Mobile

You can pair TactGlove o your mobile using the bHaptics mobile app and Bluetooth. To pair your device, please follow these steps:

1. Select the "Device" menu to connect your device(s).
2. Turn on your bHaptics device(s).
    *The LED on each device will blink blue on the left and green on the right to indicate that it is in scanning and pairing mode. 
3. When a new device is detected, tap the "Pair" button to connect.
4. Tap the "Vibration" button to check if the device is properly connected and if the haptics are functioning correctly.

Unpairing

If you no longer wish to use the TactGlove with your paired mobile device, you can unpair it.

• When the device is powered on and connected to your mobile: 
  1. Select the "More" button to review and configure the product information.
  2. Tap the "Unpair" button to end the connection.
     
     
• When the devices was previously connected to your mobile but is powered off:
  When the connected bHaptics device is turned off, it will appear in the "Paired" menu.
  1. Navigate to the "Paired " tab 
  2. Tap the "Unpair" button on the product to disconnect the connection